XTM1250SA-U 5(100)A 3x230V/400V 3-Phase Power Energy Meter DIN-rail LCD TE749
Features:
35mm standard DIN rail installation, complying with standard DIN EN50022.
Ten-pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
Seven digits display LCD, 6+1 digits display (999999.1 kWh).
There is a polarity port of pulse output passive closed and a non-polarity port of pulse output passive distant, complying with standard IEC 62053-31 and DIN 43864.
Five LED instructions respectively every power supply state, signal of closed energy impulse and distant energy impulse and data communication state.
Automatic detection the direction of the flow of load current, and Instructions on individual LCD
Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current, complying with standard IEC 62053-21.
Specifications:
Nominal voltage: 230V/400V AC (3~)
Operating voltage: 161V/279V – 300V/520V AC (3~)
Operating humidity: <= 75 %
Storage humidity: <= 95 %
Operating temperature: -25°C - +55°C
Storage temperature: -40°C - +70°C
International standard: IEC 62053-21
Accuracy class: 1
Protection level: IP51
Size: 100 x 123 x 65mm(H x W x D)
Insulation capabilities:
AC voltage withstand: 2KV for 1 minute
Impulse voltage withstand: 6KV – 1.2µS waveform
Basic current (Ib): 5 A
Maximum rated current: (Imax) 100A
Operational current range: 0.25A - 100A
Over current withstand: 1800A for 0.01s
Operational frequency range: 50/60Hz
Internal power consumption: <= 2W / 10VA per phase
Test output flash rate (PULSE LED) 320 impulses per
Remote pulse output rate (SO LED) 10 impulse per KWh
Pulse output rate (pins 7 & 8) 320 pulses per kWh
Remote pulse output rate (pins 15 & 16)
Power supply indicator (L1, L2 & L3 LED): meter is connected and working OK
Consumption indicator (PULSE & SO LED): flashing at load running
Data display mode: 6+1 digits LCD display
Data save: 20 years.
Package includes:
1 x XTM125SA-U 3-phase Energy Meter
35mm standard DIN rail installation, complying with standard DIN EN50022.
Ten-pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
Seven digits display LCD, 6+1 digits display (999999.1 kWh).
There is a polarity port of pulse output passive closed and a non-polarity port of pulse output passive distant, complying with standard IEC 62053-31 and DIN 43864.
Five LED instructions respectively every power supply state, signal of closed energy impulse and distant energy impulse and data communication state.
Automatic detection the direction of the flow of load current, and Instructions on individual LCD
Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current, complying with standard IEC 62053-21.
Specifications:
Nominal voltage: 230V/400V AC (3~)
Operating voltage: 161V/279V – 300V/520V AC (3~)
Operating humidity: <= 75 %
Storage humidity: <= 95 %
Operating temperature: -25°C - +55°C
Storage temperature: -40°C - +70°C
International standard: IEC 62053-21
Accuracy class: 1
Protection level: IP51
Size: 100 x 123 x 65mm(H x W x D)
Insulation capabilities:
AC voltage withstand: 2KV for 1 minute
Impulse voltage withstand: 6KV – 1.2µS waveform
Basic current (Ib): 5 A
Maximum rated current: (Imax) 100A
Operational current range: 0.25A - 100A
Over current withstand: 1800A for 0.01s
Operational frequency range: 50/60Hz
Internal power consumption: <= 2W / 10VA per phase
Test output flash rate (PULSE LED) 320 impulses per
Remote pulse output rate (SO LED) 10 impulse per KWh
Pulse output rate (pins 7 & 8) 320 pulses per kWh
Remote pulse output rate (pins 15 & 16)
Power supply indicator (L1, L2 & L3 LED): meter is connected and working OK
Consumption indicator (PULSE & SO LED): flashing at load running
Data display mode: 6+1 digits LCD display
Data save: 20 years.
Package includes:
1 x XTM125SA-U 3-phase Energy Meter